2008年6月29日

Minitab好書介紹

Minitab是很好用的統計及品管工具

我們在Amazon書店找到兩本不錯的書

版主會在近期內買進 到時候再詳細介紹

2008年6月10日

CMM 三次元測量儀

Coordinate Measuring Machine, CMM 在台灣業界,我們一般稱之為三次元測量儀。

以下則是摘錄自wikipedia的說明

A 'coordinate-measuring machine' (CMM) is a device for dimensional measuring. It is a machine that is used to move a measuring probe to obtain the coordinates of points on an object surface. These machines are used to measure the dimensions of target objects. Often these parts have tolerances as small as .0001". The machine uses an X-Y-Z grid to determine its position on a worktable. The probe is used to touch different spots on the part being measured. The machine then uses the X,Y,Z coordinates of each of these points to determine size and position. There are newer models that have probes that drag along the surface of the part taking points at specified intervals. This method of CMM inspection is more accurate than the conventional touch-probe method and most times faster as well. The next generation of scanning, known as laser scanning, is advancing very quickly. This method uses laser beams that are projected against the surface of the part. Many thousands of points can then be taken and used to not only check size and position, but to create a 3D image of the part as well. This "point-cloud data" can then be transferred to CAD software to create a working 3D model of the part. The laser scanner is often used to facilitate the "reverse engineering" process. This is the process of taking an existing part, measuring it to determine its size, and creating engineering drawings from these measurements. This is most often necessary in cases where engineering drawings may no longer exist or are unavailable for the particular part that needs replacement.

A coordinate measuring machine (CMM) is also a device used in manufacturing and assembly processes to test a part or assembly against the design intent. By precisely recording the X, Y, and Z coordinates of the target, points are generated which can then be analyzed via regression algorithms for the construction of features. These points are collected by using a probe that is positioned manually by an operator or automatically via Direct Computer Control (DCC).

2008年6月2日

I-MR Chart

I-MR Chart;這是Individuals and moving range charts的縮寫,也就是個別移動全距管制圖。

An I-MR chart, or individual and moving range chart, is a graphical tool that displays process variation over time. It signals when a process may be going out of control and shows where to look for sources of special cause variation.

(感謝匿名網友指正我們的錯誤 原個別移動平均管制圖 更正為 個別移動全距管制圖)

相關連結:
個別值移動平均管制圖

 
Clicky Web Analytics